BUILDING A STAND FOR THE UDS SMOKER

I had a old gasser that was just rusting away and decided to take it to the grave yard for junk.
 I took it apart and then noticed that the stand was still in pretty good shape.
 I decided to keep the stand and recycle it for the drum smoker I had built a couple years ago.
 I had some scrap lumber and so the floor was the first step.
 I formed one side of the floor with a piece of 2x12 to hold the drum steady when moving it around.
 Added another piece on the other side.
 Put a couple of straps in to hold the floor and give the frame a little more support.
 I then started on the shelf supports
Top shelf installed

Ready to go